Magnesium oxide board production line
1. Brief introduction
Magnesium oxide board production line with fashionable design,
reasonable structure, stable running manufactured board of even
thickness in large production once through double- roller-extruding
technology. This production line is equipped with shaking device
which removes inside and outside air bubble, so our board is more
smooth. In addition, we use the no-woven cloth as the separating
film to increase the toughness and strength of the board. The
machine can be adjusted arbitrarily, and then produce the board
with the thickness of 2-60mm, the biggest width of 1, 300 mm and
unlimited length. So you can adjust the thickness of board as you
2. Finished board size and features
3. Finished board features
1. Oxygenic index%: 90
2. Level combustion: SO
3. Vertical combustion: SO
4. Water content rate: 10.9%
5. Capacity: 1.15g/cm3
6. Static bending intensity: 169.46Mpa
7. Density: T/ m3 1.13
8. Water resistance: Without chalking for 24 hours and there is no
change on surface
9. No Three-wastes (waste water, waste gas and waste residue), no
pollution and environmental protection
A. Project Feature:
1. The source of the production raw materials is widely with no
regional restriction. The product is made of magnesia, mgcl2,fiber
glass mesh, on-woven fabrics and other fillers. The board is formed
one-time by the machine.
It is easy operation, low production cost, small investment and
2. The automatic mgo board production line in China has high
automatic degree, simple production technology, low labor intensity
and production line, and there is no noise and three-wastes (waste
water, waste gas and waste residue) during production.
3. Low production energy consumption. With the influence of
chemical reaction, it can meet the requirements about production
technology without high temperature and high pressure.
4. It can produce according to different customers' request like
size (length* width*thickness) , material .This automatic mgo board
production line in China can produce boards Max length 3660mm and
width is 1250mm.Thickness from 3-25mm.
B. Equipment Feature:
This automatic mgo board production line in China adopts the
technology of double-drive double-roller-extruding, and the product
is formed once after sizing, material feeding, spreading no-woven
cloth, compounding and repressing.
fireproof mgo board production line. It runs stably with high
automatic degree, the specification of its product can be adjusted
The equipment actually realizes the industrial production-line of
new model building wall board, and the product have even and glazed
surface with high compactness.
The equipment largely reduces the labor intensity of worker and
thoroughly changes many shortages of the former casting forming
with upright mould or flat mould, such as large mould usage, low
recycling rate, required electrical heating or steam heating,
single kind of product as well as the sound insulation and
heat-preserving which don’t meet the market requirements.
Packaging & Shipping
First use plastic film to wrap and cover the machine
Pack small parts in plywood box
marked with required label or shipping mark .
Use steel wire rope to fix the container ,so as to avoid to damage
because of moving
|mgo board||fully automatic|
1. Q: Are you a factory or trading company?
A: We are a factory.
2. Q: What certificate do you have?
A: We have ISO and CE certificate.
3. Q: How does your factory do regarding quality control?
A: We have a special QC department in charge of products’ quality.
4. Q: How long is the warranty period?
A: All of our products have one year warranty.
5. Q: What’s the main market of your company?
A: We have customers all over the world.
6. Q: How much production capacity of your company one year?
A: This depends on your needs.
7. Q: Where is your factory located? How can we visit there?
A: Our factory is located jinan before you arrive jinan airport ,we
will arrivethe airport in advance to pick you
Our Contact information,any question pls feel free tell me